How to Resize Photos in Batch?: Connect to my network but no access to internet

Connect to my network but no access to internet

my daughter's labtop has vista on it.the machine is telling me that it is connect to my network but does not have access to the internet.
my labtop picks up my network and is working fine.
what can I do to fix her's

Anwsers to the Problem Connect to my network but no access to internet

Download SmartPCFixer to Fix It (Free)

Hi
Assuming that you are talking about a wireless connection.
A message in the Wireless little Window that says Connected does not means that your are really have a valid functional connection.
If everything above is OK you have to be able to connect to the Router.
Connecting to the Router means that you can enter the Router's core IP into an address bar of a browse, be able to connect, see, and configure the Router's menus.
If it does not connecting to the Router, log from any computer that can connect to Wireless Router with a Wire, disable the Wireless Security, make sure that the Wireless broadcast SSID is On, and try to connect with No Wireless security.
Enable the Wireless security after you mange to establish a functional connection.
----------------------------
Wireless capacity in general.
Go over these steps and tell us where the breaking point is.
Check the Device Manager for valid Wireless card entry.
http://www.ezlan.net/Win7/net_dm.jpg
If there is No valid entry, delete any Bogus Entry, and re-install the Wireless card's Drivers.
Check the Network connections to make sure that you have a Wireless Network Connection Icon/Entry, and that the Properties of the Icon (right click on the Icon) are correctly configured with TCP/IPv4 protocol in the Network Connections Properties.
http://www.ezlan.net/Win7/net_connection_tcp.jpg
Make sure that if there is a vendor's Wireless Utility the utility is Not Running together with the Windows native Wireless utility.
----------------
Make sure that No Firewall is preventing/blocking the Wireless components to get to the Network.
Some 3rd party Software Firewalls keep blocking aspects of Local Traffic even it they are turned Off (disabled).If possible configure the Firewall correctly, otherwise totally uninstall it, and get rid of its residual processes
to allow clean flow of local network traffic.
If the 3rd party software is uninstalled or disables, make sure that Windows native Firewall is On .
---------------------------
Working TCP/IP stack should look this way.
Right click on the Wire card Network Connection, choose Status, Details, and see if it got an IP and the rest of the settings.
http://www.ezlan.net/Win7/status-nic.jpg
Description is the card manufacturing data.
Physical address is the card's MAC number.
The xx should be a number from 0 to 255 (all xx same number).
yy should be from 0 to 255
zz should be from 0 to 255 (all zz the same number.
The lease date should be valid to the current time.
*Note 1.
IP that starts with 169.xxx.xxx.xxx is not valid functional IP.
*Note 2.
There might be an IPv6 entries too.
However, they are not functional for Internet traffic or LAN.
They are needed for Win 7 special HomeGroup configuration.

Jack-MVP Windows Networking.
WWW.EZLAN.NET

Run CHKDSK to Fix Connect to my network but no access to internet

Go to the Start button.
In the Search box, type "cmd" (without quotes) and press Enter.
At the command prompt, type "chkdsk /r /f" (without quotes) and press Enter.
Reboot your computer.

NOTE: You might receive an error message that states:

"Access denied as you do not have significant privileges. You have to invoke this utility in elevated mode."

If you receive the above error message, it means you are not logged into you computer as an Administrator. If that's the case, follow these steps to run the command prompt in elevated mode:

Go to theStart button.
Go to "All Programs > Accessories" and right click on "Command Prompt".
Select "Run as Administrator".
In the Search box, type "cmd" (without quotes) and press Enter.
At the command prompt, type "chkdsk /r /f" (without quotes) and press Enter.
Reboot your computer.

Another Safe way to Repair the Problem: Connect to my network but no access to internet:

How to Fix Connect to my network but no access to internet with SmartPCFixer?

1. Download SmartPCFixer . Install it on your computer. Click Scan, and it will perform a scan for your computer. The junk files will be shown in the list.